For a Free Demo, using the 4 simple steps below, go
Here
1) Login with the username and password:
demo
2) Click on the "Take my course" button
3) Select the displayed course title and click on Course
menu button
4) Select a module and click on Launch button
Basic Water Works
Operations of the Water Utility
10 hours CE Credit for Water Treatment
$225
Water Characteristics
Disinfection
Groundwater and Wells
Surface Water Production
Distribution and Safety
Chlorinator Systems and Chemical Handling
Getting Started and History of Chlorination
10 hours CE Credit for any License
$225
Chemical Handling and Safety
Physical and Chemical Properties of Disinfectants
Process Applications
System Types
Injectors/Ejectors
Containers and Connections
Gas Chlorinators and Switchovers
Maintenance and Troubleshooting
Chlorination Math
Pump and Motor Maintenance
Program
10 hours CE Credit for any License
$225
Prime Movers: Electric Motors and Controls
Centrifugal Pump Mechanics
Centrifugal Pump Hydraulics
Lubrication
Bearings
Compression Packing
Mechanical Seals
Positive Displacement Pumps
Special Pumping Units
Water Utilities Safety
Water Utility Safety
Intro to Water Utility Safety
10 hours CE Credit for any License
$225
Personal Protective Equipment
Back Safety
Hazard Com. and Chemical Safety
Laboratory Safety
Biological Hazards
Confined Space Safety
Emergency Response
Electrical Safety
Trench Safety
Work Zone Safety
Basic Environmental Chemistry
Basic Chemistry
5 hours CE Credit for Water or Wastewater Treatment
$150
Atomic/Molecular Weight
Dilution Calculations
Wastewater Chemistry
Water/Wastewater Treatment
Coagulation, Softening and BOD
Chlorination, DBP and Corrosion Control
Water Transmission and Distribution
Introduction
4 hours CE Credit for Water Treatment or Distribution
$150
Problem Consideration in Pipes Used
Pipe Installation, Maintenance and Repair Requirements
Valves and Fire Hydrants
Water Storage, Tank Maintenance and Repairing Mains
First, complete the online registration. You will be asked to provide your name, company name, address, social security number, e-mail, and telephone number.
Second, enroll in and pay for the course you wish to take. Payments made through the online credit card transaction (Visa or MasterCard) are usually approved within seconds. Payments by check or money order will take longer to allow for bank processing. You will be notified by e-mail after the payment has been processed. At that time, you may start the course. Send checks payable to: (TAUD, P.O. Box 2529, Murfreesboro, TN, 37133)
Once you are enrolled, log in under "Registered User" and click on "New Learning Session". Select the course you wish to take and click on "Course Menu". This will take you to the Module Map. Then select the radio button next to "Intro" and click on "Launch". Your new learning session will then begin.
You are not required to complete the course in a single learning session. Unless stated otherwise, you may start and stop as often as you like until you complete the course. To continue a course, return to this page and click on the "Continue a Course" link at the top of the page.